9 10
5
Picture 5. Wind output
（
Picture 5
）
. Press FUNC five times continuously
，
appear
Picture 5, it means adjust the wind output, press UP and
DOWN, it can adjust 1%~100% wind output.
Picture 6. DMX adjust
(Picture 6). Press FUNC six times continuously
，
appear Picture 6,
press UP and DOWN, it can adjust 1~511 DMX start address.
5.22. TIME Key-press
Press “TIMER”,timer and ration. Show circularly the picture 2
and picture 3,it mean the machine will be worked as the setup of
picture 2
、
3
、
4 and 5. Press the “TIMER” again,return to the main
menu.
5.23 VOLUM Key-press
Press “VOLUM”,the machine start to working, show the picture 1
spray time. Also it can adjust the spray time thought
“UP” and
“DOWN”. Press the “VOLUM” again,return to the main menu.
5.24 MAUAL Key-press
Pre
ss “MAUAL”,fan output.It show the setup picture 5. Also it
can adjust the fan output through
“UP” and “DOWN”.
“VOLUM” and “MAUAL” can be control independently after
heating up if the machine haven’t turn into the “FUNC” menu.
5.3 DMX control
DMX have priority when the machine put in the XLR socket.(it
means the machine is controlled by DMX,the data will be
connected the DMX, all the key-press on the machine will be stop
using.
When the machine receives the correct DMX signal, the machine
will have a two channel, the first channel = pump, second
channel = fan.
Through the XLR socket, it can connect to multiple machines and
use all at the same time.
5.4 FLUID PROTECTION
When the haze fluid is completely depleted, the LCD panel
interface is shown in picture 7. In this case, haze machine stop
working, need to add fill in haze liquid and then press MAUAL
