3
RGB Wiring diagram
RGBW Wiring diagram
Single colour LED flex wiring diagram
RGB Wiring diagram
RGBW Wiring diagram
Single colour LED flex wiring diagram
RGB Wiring diagram
RGBW Wiring diagram
Single colour LED flex wiring diagram
CCT LED Flex wiring diagram
•
Depending on which type of LED strip is used, connect to the corresponding channels on the input side of the
amplifier using V+ as the common in as per wiring diagrams
•
Connect a suitable LED load to the input and output side of the amplifier using V+ as the common out
•
Switch on power supply and check for correct operation
WARNING
This product must be disconnected from the circuit if it subjected to any high voltage or insulation resistance testing.
Irreparable damage will occur if this instruction is not followed.
GENERAL
The unit should be recycled in the correct manner when it reaches the end of its life. Check local authorities for where
facilities exist.
WARRANTY
This product has a warranty of 1 year from date of purchase. Failure to install this product in accordance with the current
edition of the IEE Wiring Regulations, improper use, or removal of the batch codes will invalidate the warranty. If this
product should fail within its warranty period it should be returned to the place of purchase for a free of charge
replacement. ML Accessories does not accept responsibility for any installation costs associated with the replacement
product. Your statutory rights are not affected. ML Accessories reserve the right to alter product specification without prior
notice.
WARNING
This product must be disconnected from the circuit if it subjected to any high voltage or insulation
resistance testing. Irreparable damage will occur if this instruction is not followed.
• Depending on which type of LED strip is used, connect to the corresponding channels on the
input side of the amplifier using V+ as the
common in
as per wiring diagrams
• Connect a suitable LED load to the output side of the amplifier using V+ as the
common out
• Switch on power supply and check for correct operation
GENERAL
The unit should be recycled in the correct manner when it reaches the end of its life. Check local
authorities for where facilities exist.