•
These instructions should be read carefully and retained after installation by the end user for
future reference and maintenance.
•
These instructions should be used to aid installation of the following products:
T8LEDP9CW / T8LEDP9DL / T8LEDP18CW / T8LEDP18DL / T8LEDP24CW / T8LEDP24DL /
T8LED6 / T8LED6D
GENERAL INSTRUCTIONS
• This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671)
and current Building Regulations. If in any doubt, consult a qualified electrician
• Please isolate mains prior to installation or maintenance
• Check the total load on the circuit (including when this product is fitted) does not exceed the rating of the
circuit cable, fuse or circuit breaker
• This product is IP20 rated
SAFETY
INSTALLATION
• Note - If this product is being used in conjunction with an external PIR or sensor, please confirm with the
manufacturer of the sensors that they are compatible with LED lamps.
• This LED tube is designed to fit into Knightsbridge LED-ready battens or non-corrosive fittings. It is not
designed to retrofit into fluorescent fittings unless any high-frequency or electronic ballast is removed and the
fitting rewired internally as shown below (see Fig. 1)
