• Remove the lock ring, insert pop-up charger through the hole and secure the lock ring
onto the underside
Fig. 1
Fig. 2
INSTALLATION & MAINTENANCE MANUAL
These instructions should be read carefully and retained after installation by the end user for future reference
and maintenance.
These instructions should be used to aid installation of the following product:
SK0015
SAFETY
•
This product must be installed in accordance with the latest edition of the IEE Wiring Regulations
(BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician
•
Please note the IP (Ingress Protection) rating of this product when deciding the location for installation
•
This product is Class II double insulated
•
This product is IP20 rated
INSTALLATION
Note
–
the selected surface for installation must be at least 10mm thick.
This product is designed to fit into standard sized office desk cut-outs of 60-80mm without the need to cut
further holes (see Fig. 1)
•
Cut a suitable hole in the mounting surface as per the cut-out details (see Fig. 1)
Fig. 1
•
Remove the lock ring, insert pop-up charger through the hole and secure the lock ring onto the
underside
Fig. 2
•
Connect to the plug-in adaptor, plug into a socket
and check for correct operation
Remove
lock ring
INSTALLATION & MAINTENANCE MANUAL
These instructions should be read carefully and retained after installation by the end user for future reference
and maintenance.
These instructions should be used to aid installation of the following product:
SK0015
SAFETY
•
This product must be installed in accordance with the latest edition of the IEE Wiring Regulations
(BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician
•
Please note the IP (Ingress Protection) rating of this product when deciding the location for installation
•
This product is Class II double insulated
•
This product is IP20 rated
INSTALLATION
Note
–
the selected surface for installation must be at least 10mm thick.
This product is designed to fit into standard sized office desk cut-outs of 60-80mm without the need to cut
further holes (see Fig. 1)
•
Cut a suitable hole in the mounting surface as per the cut-out details (see Fig. 1)
Fig. 1
•
Remove the lock ring, insert pop-up charger through the hole and secure the lock ring onto the
underside
Fig. 2
•
Connect to the plug-in adaptor, plug into a socket
and check for correct operation
Remove
lock ring
