• Alternatively, if using the MR16 lamp holder, wire from the secondary side of the 12V transformer or driver
to the terminal block
• Replace the terminal cover and cable clamp
• Insert a compatible lamp into the selected GU10 or MR16 holder and clip lamp into the bezel
• Fit the bezel into the fitting by locating the bezel lugs into the body of the luminaire and rotating clockwise
until it locks into position
• Lift both spring clips on the sides of the fitting and push into the ceiling
• Switch on and check for correct operation
This product should be recycled in the correct manner when it reaches the end of its life. Check local
authorities for where facilities exist.
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may
damage the product.
This luminaire is dimmable dependent on lamp and driver type.
This product has a warranty of 1 year from date of purchase. Failure to install this product in accordance
with the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch
code will invalidate the warranty. If this product should fail within its warranty period, it should be returned
to the place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for
any installation costs associated with the replacement product. Your statutory rights are not affected. ML
Accessories reserve the right to alter product specification without prior notice.
GENERAL
WARRANTY
