background image

These instructions should be read carefully and retained after installation by the end user for 
future reference and maintenance. 
These instructions should be used to aid installation of the following products:  
NH0183BD / NH0184SQ 

GENERAL INSTRUCTIONS

 This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) 

and current Building Regulations. If in any doubt, consult a qualified electrician 

 Please isolate mains prior to installation or maintenance 

 Check the total load on the circuit (including when this luminaire is fitted) does not exceed the rating of the 

circuit cable, fuse or circuit breaker 

 Please note the IP (Ingress Protection) rating of this luminaire when deciding the location for installation 

 This product is for indoor use only 

 This product is Class I and must be earthed 

 This product series is IP20 rated 

SAFETY

INSTALLATION

 Provide power to the required point of installation  

• NH0183BD: using a 7mm spanner, remove the two nuts securing the baseplate to the luminaire 
• NH0184SQ: remove the two screws either side of the baseplate 
• Using the baseplate as a template, mark the location of the fixing holes and drill the holes ensuring not to 

infringe with any gas/water pipes or electrical cables 

• Fix the baseplate to a suitable solid surface using the screws provided 
• Connect the luminaire to the mains supply ensuring the correct polarity is observed (see Fig. 1):  

L -Live (brown), E - Earth (green/yellow), N - Neutral (blue) 

NH018x INSTRUCTION MANUAL.indd   2

NH018x INSTRUCTION MANUAL.indd   2

22/10/2021   10:33:32

22/10/2021   10:33:32

Reviews: