•
Install a timber stud or batten at a depth of 60mm to allow room for the flex (see Fig. 3); or at a depth
of 45mm if a cut-out in the batten is made for the flex
Fig. 3
•
If mounting into masonry, cut a hole 323 x 65mm and 45mm deep, with an extra channel for the flex
•
Install as above, discarding the brackets and using suitable screws (not provided) for fixing the unit to
the timber batten, or to the masonry
USB CHARGING FUNCTION
This product is designed for charging portable USB devices only and contains a short circuit and overload
protection feature. If there is no power from the USB socket unplug the connected device. Check to ensure the
USB socket and USB device have not come into contact with water, liquid or debris and the cable to the device
is not damaged. With no device connected to the USB socket it will automatically reset and be ready for use.
WARNING
This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed.
GENERAL
This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities
for where facilities exist.
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the
product.
WARRANTY
This product has a warranty of 1 year from date of purchase. Failure to install this product in accordance with
the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will
invalidate the warranty. If this product should fail within its warranty period it should be returned to the place of
purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation
costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve
the right to alter product specification without prior notice.
DCNOV20_V1
