WARNING
GENERAL
WARRANTY
This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed.
This product should be recycled in the correct manner when it reaches the end of its life. Check local
authorities for where facilities exist
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the
product and invalidate the warranty
This product is non-dimmable
This product has a warranty of 2 years from date of purchase. Failure to install this product in accordance
with the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch
code will invalidate the warranty. If this product should fail within its warranty period it should be returned
to the place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for
any installation costs associated with the replacement product. Your statutory rights are not affected. ML
Accessories reserve the right to alter product specification without prior notice.
ML Accessories Limited
LU5 4LT
www.mlaccessories.co.uk
DCOCT19_V1
ACCESSORIES LTD
INSTALLATION INSTRUCTION
LED Stair / Foot Light
Luen Yick Electrical Mfg. Co., Ltd.
Flat F,10/F., Blk. 2, Kingsford Ind. Bldg., 26-32 Kwai Hei St., Kwai Chung, N.T., Hong Kong
Pack Contents:
Instruction leaflet
Mounting screw
x1
Model : FST-SQ2 /FCR-SQ2
FST-DM2 /FCR-DM2
Voltage : 220-240V~50/60Hz
Wattage : 1.5W
Product:
PLEASE READ THESE BEFORE COMMENCING INSTALLATION AND
RETAIN FOR FUTURE REFERENCE.
If the external flexible cable or cord is damage, it shall be exclusively
replaced by the manufacturer or his service agent or similar qualified
person in order to avoid a hazard.
This is a Class I product. Must earth.
CAUTION: Risk of Electric Shock - For indoor use only
If in doubt regarding these installations, consult a qualified electrician
INSTALLATION & OPERATION
Installation
1, Please turn off the power before installation.
(Suitable for standard 1 gang back box in 25mm depth)
2, Connect the power cord to the terminal and tighten the screw;
Brown/red core to the terminal marked “L” (Live)
Blue/black core to the terminal marked “N” (Neutral)
Yellow and Green core to the terminal marked “ ” ( Earth)
3, Use a tool, such as a slotted screwdriver to open the metal cover from the side;
4, After opening the cover, you will see the mounting screw holes;
5, Twist the mounting screws and then cover the metal cover;
6, After the installation is complete, turn on the power.
Tighten the screws
Yellow and Green core
Blue/black core
Brown/red core
Use the tool open the cover
Mounting screw holes
x2
LED PLINTH LIGHT
DCOCT19_V1
Insert screwdriver to
remove cover
Fig. 1
Mounting screw holes
