background image

• Once the detection area is set, adjust the time and lux settings as required
• Check for correct operation

Fig. 2

 

Fig. 2 

 

Once the detection area is set, adjust the time and lux settings as required 

 

Check for correct operation 

WARNING 

This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing. 

Irreparable damage will occur if this instruction is not followed. 

GENERAL 

Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not use 

aggressive cleaning products or solvents which may damage the product.   

Do not use any source of high-pressure washers to maintain or clean this luminaire. 

This product is non-dimmable. 

This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities for 

where facilities exist.  

WARRANTY

 

This product has a warranty of 3 years from date of purchase. Failure to install this product in accordance with the 

current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will invalidate 

the warranty. If this product should fail within its warranty period, it should be returned to the place of purchase for a 

free of charge replacement. ML Accessories does not accept responsibility for any installation costs associated with 

the replacement product. Your statutory rights are not affected. ML Accessories reserve the right to alter product 

specification without prior notice. 

 

230V 50Hz, IP44, Class 2, NON-Dim 

 

DCMAR22_V1 

 

 

 

Summary of Contents for EAPIR1BK







Reviews: