BL5xx INSTRUCTIONS_SPREADS.indd 1-4
BL5xx INSTRUCTIONS_SPREADS.indd 1-4
20/01/2021 16:02:41
20/01/2021 16:02:41
TERMINATION AND ACCESSORIES
• Connect the luminaire to the mains supply ensuring the correct polarity is observed:
L - Live (brown), N - Neutral (blue)
• Select the desired colour temperature by means of the sliding switch on the LED gear tray
(where applicable)
• Refit the LED gear tray onto the luminaire housing ensuring the cable does not press
against the terminal block which may cause it to open, and secure it with all four screws
ensuring a tight seal is made
• Select a decorative accessory if required, and hold it in place while fitting the appropriate
outer frame – the deep frame should be used if surface mounting; the shallow frame if
recess mounting
• Switch on and check for correct operation
Fig. 4
