GENERAL
WARNING
This luminaire must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed.
This product is not suitable for installation in or near a coastal or marine environment.
Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not
use aggressive cleaning products or solvents which may damage the product.
Do not use any source of high-pressure washers to maintain or clean this luminaire.
This product is non-dimmable.
This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities
for where facilities exist.
• Connect the luminaire to the mains supply ensuring the correct polarity is observed: L - Live (brown), E -
Earth (green/yellow), N - Neutral (blue)
• Insert a suitable E27 lamp, max. 60W
• Reattach the body of the luminaire to the back plate
• Switch on and check for correct operation
