MKS Instruments UK Ltd
V2000-C/E Hardware Manual – SP102005.102 March 2013
9
Warning Symbols
Various warning labels and symbols may be attached to the instrument their general use is explained below.
The Exclamation Mark (ISO 3864, No.B.3.1) label.
General caution.
Refer to the manual for detailed instructions.
The Electric Shock (ISO 3864, No.B.3.6) symbol.
This is generally used on the instruments to warn of
the presence of hazardous voltages.
The following warning labels used on the Vision 2000-C/E systems are explained below.
The Exclamation Mark (ISO 3864, No.B.3.1) label.
On the rear panel of the Microvision2 refers to:
Read all instructions carefully before use.
The control and signal ports are designed for
connection to MKS Instruments accessories via MKS
Instruments cables.
The Electric Shock (ISO 3864, No.B.3.6) symbol on
the:
Turbo controller, refers to possible risk of Electric
shock, if the covers are removed.
Only competent Service personnel should gain
access.
Remote Vacuum Controller, refers to possible risk of
Electric shock, if the covers are removed.
Only competent Service personnel should gain
access.
Front panel of the Microvision2, refers to accessible
hazardous voltages on the analyser connector, when
not mated to the analyser, which may result in a non-
hazardous electric shock if touched.
Tuning adjustment holes, which are not for operator
use.
