The Ariel User Manual
Rev 5, 01/04/21
8
Chapter 3: Accessories and Features
The Ariel has several accessories and features:
•
Window – used for regular measurements.
•
Diffuser – used for higher power-density beams, refer to specifications for details.
•
Protective Cover with target – used to protect the diffuser and window
from scratches, and for laser aiming. Should be used with pointers only,
and removed before switching on the laser.
•
USB-C cable – used for charging and as a data cable for StarLab.
•
Wall charger
•
Case – has a separate sleeve for the window/diffuser while not in use
•
USB rubber plug – used in order to protect the USB socket from dust.
The device itself is protected even if the rubber plug is detached. The rubber plug may be removed
permanently using a simple screwdriver without any harm to the dust and splash proof protection.
•
Heatsink screw holes – there are screws on the bottom side of the Ariel that allow mounting on a
heatsink.
Figure 4: Ariel parts
Figure 3: Protective cover
