16
IDL280-LM Series
Long Travel Industrial Linear Stages
7.0 —
Connection to Non-Newport Controllers
Newport stages can be operated with Non-Newport controllers. However,
under such operating conditions Newport makes no guarantee regarding
achievable specifications. To aid Newport customers using non-Newport
Controllers with IDL280-LM Series stages, wiring conventions and motor
characteristics are provided. It should be noted, damage caused by
improper configuration or operation while in use with non-Newport
controllers is not covered by the warranty.
Please refer to the Design Details and Specifications for more information
to help configure the stage with your controller. Newport also provides a
tech note on configuring third party stages with Newport controllers in the
IDL280-LM website, which may be useful as a reference.
WARNING
Newport is not responsible for malfunction or damage of IDL280-LM
stages when used with non-Newport controllers.
It is the customer’s responsibility to modify the cable and take care of
sensor signal connections, when using the stage with non-Newport
controllers.
WARNING
• Maximum peak voltage: 330 Vpeak
• Maximum rms current: 4.6 Arms without air cooling
5.5 Arms with 3-bar air cooling
•
The End-of-Run signal is open collector type. It supports up to 30 V
and 10 mA.
I
in
max.: 10 mA
V max.: 30 V
NEWPORT
STAGE
End-of-Run:
A104
5F
0 -
EDH036
2
En10
5
0 —
0
2/
20
