MKN HansDampf 10.1, Service Manual

Page: 58 / 72

Service manual
How to activate and disable the demo mode
Aktive Demo mode (Displays after switching the unit on)
(SHO = Show-Mode)
Aktivate / disable demo mode:
1. Switch the unit on
2. Press Flexi Button and choose
with the upper knob
Par
(parameter)
3. Press Start/ Stop- Button and on
the lower displays shows
000
.
4. Enter Password
888
with the lower knob
5a Enable demo mode:
Press Start/ Stop- Button.
SHO
appears on the upper display.
The unit is in the demo mode
6a Disable demo mode:
Press Start/ Stop- Button.
SHO
appears not anymore. All LED´s
from the 4 operation modes are
on. The demo mode is disabled.
58
SHO
Par
000
888
SH0