containers, tubs, flower pots, swimming pools,
aquariums, pressurized vessels, taps, pipes,
downspouts, expansion vessels, air conditio-
ning units, etc.
•
The product is not intended to be used in exces-
sively hot or cold, dusty, humid environments, in
the presence of atmospheres saturated with gas
or chemical vapors.
•
In the event that the product emits a bad smell
or smoke beyond the usual levels, fire, unusual
noises or in case of deformation or swelling,
immediately stop using it and contact qualified
technical personnel.
•
When the appliance is not in use, disconnect it
from the power supply and store it only after it
has cooled down.
•
Periodically check the integrity of the product
and wiring: if anomalies are detected, suspend
use and contact qualified personnel.
•
Perform periodic maintenance as indicated in
the following chapters.
Parts identification
1. Nozzle
Transmits heat for melting solder. En-
trance for melted solder.
2. Glass Tube
Hold the ceramic filter. Solder wast
will be stored here.