MK ExLRT, Operator'S Manual

Page: 28 / 28

OPERATOR MANUAL EXLRT
Ref: XLR-104 © 2020 MK Test Systems Ltd Page 28 of 28
19 C
ALIBRATION
This window displays if The ExLRT will allow measurements to be taken using uncalibrated loop or
joint cables. These are cables that were NOT used during the last verification process. The ExLRT user
must have the appropriate permissions set in order to use this function.
20 S
YSTEM
This window displays any specific hardware setting.
21 C
ALIBRATION
V
ERIFICATION
To run a verification program, the ExLRT must be controlled via MK ExLRT PC Software.
After verification and if successful, the ExLRT will be set to the following

The ExLRT will hold a list of all cables used during the calibration process. Any other
cables that connect to the ExLRT will not work and the ExLRT will show a message on
the screen.

The Calibration OK icon will be displayed with the verified cables plugged in.