MK Diamond Products 159345, Owner'S Manual

Page: 13 / 36

13
TRANSPORT
CX-3
®
TRANSPORT
CAUTION 1. The CX-3
®
weighs approximately one hundred and sixteen (116 pounds),
use care when transporting.
2. Two people are required to lift and transport the CX-3
®
.
To lift the CX-3
®
, one person will lift by grasping the Handlebar and one person will lift by grasping
the front of the CX-3
®
.
Follow the assembly instructions to prepare your CX-3
®
for operation.
(C)
Use a 3/16” allen wrench to
tighten screw. Do not over
tighten as this will cause dam-
age to the crank wheel.
(A)
Thread the crank wheel on to
the depth control screw and
tighten until snug.
(B)
The crank wheel has a 3/8 - 16
set screw installed.
Crank Wheel Assembly
(C)
Install one Tri-Knob Washer onto
each Tri-Knob. Install Tri-Knobs
through the Handlebar and into the
threaded holes on the CX-3 ®
console frame.
(A)
Locate the threaded holes on
both sides of CX-3 ® console
frame.
(B)
Align the handlebar with the
threaded holes on the sides of
the CX-3 ® console frame.
Handlebar Assembly