MJM MT21-MID, User Manual

Page: 7 / 15

7
Pedal Assist (PAS) Levels
This is the level of assistance the motor will deliver once activated. Your bike
has 5 PAS levels numbered from 1-5, with 1 being the lowest level of assistance
(~6 km/h) to 5 being the highest (~32 km/h). Use the “+” and “
–
” buttons to
adjust the PAS level.
If you want to ride with no assistance press the “
–
” (down) button until a 0 is
shown in the assist section.
Lights - Turning on and off
Our bikes are fitted with automatic lights that will turn off and on
depending on the environment you are in.
To manually turn the lights on and off when the bike is turned on, press and hold
the button with the light icon. After a couple seconds you will see the headlight
icon pop on the top of your display and the front and rear lights will turn on. Once
you see this, release the light button and the lights will remain on until turned off
or the bike turns off.
To turn off the lights repeat this process until you see the lights turn off.
Walk Function
The walk function activates the motor at a slow speed to assist you
in walking the bike.
To use this function, you must first set the bike into the correct mode. Do this by
pressing the “
–
” (down) button until you see the icon of a person walking a bike.
This mode is before/below 0 on the PAS. Once in the walk mode you can then
press and hold down the “
–
” (down) button and you will feel the motor activate
and begin assisting the bike forwards. Once you release the “
–
” (down) button
the walk function will turn off.
• the walk function will not work if you are holding the brakes
Display and
Controller