136-145
Color Snapping running 6 (It control by CH1,CH5 to
CH27. The 5CH is change speed)
146-155
Color running 1 (It control by CH1,CH5 to CH27. The
5CH is change speed)
156-165
Color running 2 (It control by CH1,CH5 to CH27. The
5CH is change speed)
......
.......
236-245
Color running 10 (It control by CH1,CH5 to CH27. The
5CH is change speed)
246-255
Sound control (It control by CH1,CH6 to CH27.)
CH4
Function 1
0-30
No function
31-45
Color running 1 (It control by CH1,CH5 to CH9. Control
the base color brightness)
...
.....
91-105
Color running 4 (It control by CH1,CH5 to CH9. Control
the base color brightness)
106-120
RGBW mix Color change
121-135
Color running 5 (It control by CH1,CH5 to CH9. Control
the base color brightness)
....
......
141-255
Color running 13 (It control by CH1,CH5 to CH9.
Control the base color brightness)
CH5
0-255
Function speed
CH6
0-255
Red color dimming
CH7
0-255
Green color dimming
CH8
0-255
Blue color dimming
CH9
0-255
White color dimming
CH10
0-255
LED 1 R color dimming
CH11
0-255
LED 1 G color dimming
CH12
0-255
LED 1 B color dimming
......
......
.........
CH81
0-255
LED 18 W color dimming
10
SAFETY INSTRUCTIONS
This device has left the factory in perfect condition. In order to maintain this
condition and to ensure a safe operation, it is absolutely necessary for the user
to follow the safety instructions and warning notes written in this user manual.
When unpacking and before disposing of the carton, check there is no transportation damage
before using the product. Should there be any damage caused by transportation, consult your
dealer and do not use the apparatus.
The device can be use indoors and outdoors, IP65.
The device is not designed or intended to be mounted directly on to inflammable surfaces
The device is only intended for installation, operation and maintenance by professional person.
Do not device the beam onto inflammable surfaces, minimum distance is 5m.
Avoid direct exposure to the light from the lamp. The light is harmful to the eye.
Do not attempt to dismantle or modify the projector in any way.
Electrical connection must only be carried out by qualified personnel.
Before installation, ensure that the voltage and frequency of power supply match the power
requirements of the projector.
It is essential that each device is correctly earthed and that electrical installation conforms to all
relevant standards.
Do not connect this device to any other types of dimmer apparatus.
Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the
power-cord come into contact with other cables. Only handle the power-cord by the plug. Never
pull out the plug by tugging the power-cord.
LED lens shall be changed if they have become visibly damaged to such an extent that their
effectiveness is impaired, for example by cracks or deep scratches.
Exterior surface temperatures of the luminaire after 5 minutes operation is 50
°
C
，
when steady
state is achieved 65
°
C.
There is no user serviceable parts inside the projector, do not open the housing and never operate
the device with the covers removed.
If you have any questions, don’t hesitate to consult your dealer or manufacturer.
Always disconnect from the mains, when the device is not in use or before
cleaning it or before attempting any maintenance work !
1
