9
◆
CH2
Custom channel 2
.............
◆
CH16
Custom channel 16
5)
Perform
◆
Back Return to main menu
◆
Built-in Auto mode Auto Running
◆
Built-in Sound mode Sound Running
◆
Custom 1 Custom1
Auto and Sound Running
◆
Custom 2 Custom2
Auto and Sound Running
◆
Custom 3 Custom3
Auto and Sound Running
◆
Custom 4 Custom4
Auto and Sound Running
6)
Set
◆
Back Return to main menu
◆
System Reset Light reset
◆
Default setting Return to default setting
◆
DMX mode DMX mode (DMX1/DMX2)
◆
X inversion Pan inversion(NO/YES)
◆
Y inversion Tilt inversion(NO/YES)
◆
Effect of wheel model Effect of wheel model(NO/YES)
◆
DMX signal If have not DMX signal(KEEP/CLEAR)
◆
Screensaver Screensaver(ON/OFF)
◆
Switch on light bulbs Switch on light bulbs(ON/OFF)
◆
Bulb started state Bulb started state(ON/OFF)
◆
DMX reset DMX reset(ON/OFF)
◆
Aiming screen Aiming screen(Need the password)
◆
Parameters Adj Parameters Adj
◆
X adjustment X adjustment
◆
Y adjustment Y adjustment
◆
Color adjustment Color adjustment
◆
Gobo adjustment Gobo adjustment
◆
Zoom adjustment Zoom adjustment
◆
Focus adjustment Focus adjustment
◆
Gobo2 adjustment Gobo2 adjustment
◆
Shutter adjustment Shutter adjustment
Maintenance:
To prolong the life of the projector, some maintenance work has to be done to ensure the optical
system in good condition. If the projector does not function, check the fuses on the power socket of
the projector, they should only be replaced by fuses of the same specification. Should these be
damaged, call a qualified technician before replacement. The projector has thermal protection
device that will switch off the projector in case of overheating. Should either of these operate, check
that the fans are not blocked, and if they are dirty, clean them before switching on the projector
again. Check that the fans are operational, if not, call a qualified technician.
☆
Any maintenance work should only be carried out by qualified technicians.
