VII. Difficult processing
Question
Answer
The LED moving head lamp can
not start.
Inspects the fuse on the rear panel.
Although shines, but the LED
moving head lamp can not accept
the instruction of the controller.
Check the digital start address and also
check the connection situation of the
communication control line the.
LED moving head lamp only can
work intermittently.
Inspect the power supply and voltage is
whether normal.
Do not receive the DMX512 signal
Whether the signal lines do contact
good or broken.
The light beam appears gloomily.
Inspect the optics part is whether clean.
Note: Other maintain work should by the specialist which has
the experience to carry on.
VIII. Declaration
Before delivery, this fixture have the performance intact, packaging integrity,
and all users should strictly observe the above warnings and operating
instructions for the matter, with any damage caused by misuse is not
guaranteed within the company, for damages caused by ignoring the manual
instruction is not within the scope of the distributors or dealers. Thank you for
your cooperation!!
IX.
Equipment and appendix
1. Led moving head light ----------------------------------1pcs
2. The Product of Instruction------------------------------1pcs
3. Power Cable ----------------------------------------------1pcs
3
4. XLR connector--------------------------------------------1unit
5. Bracket------------------------------------------------------1pcs
6.
M6
mm Screw----------------------------------------------2pcs
X. Technical parameters
Voltage: AC100-240V,50Hz/60Hz
Power Consumption:
90 Watts
LED:
6IN1*4LED
LED Power: 18W (x 4pcs)
LED Current: 500mA / 1 pc
LED Beam Angle: 25°
Pan:540°
Titl:180°
Operation Modes: DMX512, Manual, Sound, Internal Program, Master/Slave
DMX Control:
16/18
Channels
Control Panel: Digital 4 Character Alphanumeric
Maximum Ambient Temperature: 40° C
Gross Weight: 2.8 kg
Package Size: 23 x 16 x 19.5cm
XI. Menu display function
Use button switch and LED display, can set the address code and function
code easily.
Check or modify lighting function settings, Press the
MENU
button. LED display panel
will display function menu of lighting. Function operation menu all have corresponding
submenu. Each menu all represent the specific functions of lamps, specific see below
"operation menu" section.
4
