Page 12
Output Meter
On the main display window there is a series of LED’s
which light-up as power output is increased. This is in-
tended as a guide only and provides an indication of how
hard the system is working.
Reference
150 MkII
User’s Manual
Remote Eye
The Infrared Eye in the shape of a small mouse is placed at a location desirable for line of sight
and the jack plug inserted into the panel marked as “Remote”.
RM1
Provides for full remote control of all functions and enables the user to setup the entire listening
sound stage without moving from the listening position. Once settings are stored, and assuming
it is then desirable to turn the
Reference
150
so that only the cabinet is visible, then this can be
achieved without compromising the remote function. The remote eye feature enables the
Ref-
erence
150
to be placed out of sight once setup is complete with user presets easily selectable
by pressing one of the P1 - 4 buttons.
REMOTE RM1
The remote RM1 system comes in two parts to provide optimum flexibility.
Display
Description
Factory
Range
Menu
Default
Hi
Gain adjustment for RCA & Speakon inputs
–99
–99 to 0
Hro
Frequency adjustment for RCA & Speakon inputs
120hz
20 to120hz
Lo
Gain adjustment for LFE input (via RCA)
–99
–99 to 0
Lro
Frequency adjustment for LFE input (via RCA)
120hz
20 to120hz
Pha
Phase adjustment
0°
0° to 180°
Bri
Display Brightness
5
1 to 5
APO
Auto Power Off function in minutes
OFF
OFF, 10-60
Etr
External 12v Trigger input polarity setting
Positive
Positive or Negative
Aon
Auto Power on sensitivity
002
000 to 009
dto
Display Timeout
OFF
Off
/
On
14/12/2005 (Ref – 150)
Page 5
Reference
150 MkII
User’s Manual
Hi
High Level Gain from Speakon and Line Level Gain from RCA.
Hro
Roll off (crossover) frequency for High Level Speakon and Line Level RCA.
Lo
LFE Gain from RCA line level input.
Lro
Roll off (crossover) frequency for Line Level RCA LFE input.
Pha
Phase
adjustment.
Bri
Brightness
setting.
Apo
Auto Power off time setting.
Etr
External trigger input polarity setting.
Aon
Auto Power on sensitivity setting.
Dto
Display timeout.
Display Menu
Lro
This function parameter setting allows adjustment of the roll off (crossover) from the LFE
input received via the RCA line level connector. This parameter enables high frequencies to be
filtered out above the displayed setting with a 24dB slope from sources connected to this input.
Most but not all AV decoders offer an adjustable pre filtered output for the LFE content. Offering
this fully adjustable setting for the LFE crossover gives a more flexible use for this input and
enables the user to make adjustments over a wider frequency band and result in better
integration possibilities. Selecting above 120hz results in the “LFE bypass” circuit option. The
LFE bypass circuit sets the crossover to 200hz and only gain is adjustable. The adjustment
range is from 20hz to 120hz & bypass, incremented in single digit steps. This highly accurate roll
off adjustment enables precise matching of crossovers when using a multiple subwoofer set-up.
Hi
This function parameter setting allows adjustment of the gain from the inputs received via the
Speakon and RCA line level left and right connectors. This parameter enables adjustment of gain
and thus sound pressure output produced in relation to the input from sources connected to
these inputs. The adjustment range is from –99 to 0 incremented in single dB digit steps. This
highly accurate gain adjustment enables precise matching of gains when using a multiple
subwoofer set-up.
Hro
This function parameter setting allows adjustment of the roll off (crossover) from the inputs
received via the Speakon and RCA line level left and right connectors. This parameter enables
high frequencies to be filtered out above the displayed setting with a 24dB slope from sources
connected to these inputs. The adjustment range is from 20hz to 120hz incremented in single hz
digit steps. This highly accurate roll off adjustment enables precise matching of crossovers when
using a multiple subwoofer set-up.
Lo
This function parameter setting allows adjustment of the gain from the LFE input received
via the RCA line level LFE connector. This parameter enables adjustment of gain and thus sound
pressure output produced in relation to the input from the LFE output of your AV amplifier. The
adjustment range is from –99 to 0 incremented in single dB digit steps. This highly accurate gain
adjustment enables precise matching of gains when using a multiple subwoofer set-up.
Menu Item
Adjusted
Hi Hro
Lo Lro
14/12/2005 (Ref – 150)
