Mizuho MOS-1302B, Operator'S Manual

Page: 42 / 86

38
4
Operation
Adjustment of head plate
The head plate can be flexed in 15° increments, to 4
different positions upward (max. 60°) and to 6 different
positions downward (max. 90°). The head plate can
also be detached.
Pull the head plate flexing lever toward the head
direction. The head plate can be flexed upward and
downward. Releasing the lever allows the head plate
to be fixed in that position.
n
Flexing
2. Hold the both sides of the head plate and pull it
straight.
1. Loosen the two head plate fixing handles located
on the lower side of the back plate.
n Detachment
Head plate flexing lever
Head plate
fixing handle
WARNING
- Be sure to tighten the head
plate fixing handles securely.
If the head plate moves, the
patient may get injured.
- The head plate weighs
7kg(15.4lbs). Pay special
attention when handling it. It
may drop and cause damage
or injury.
Head plate