Mizuho 18-300-70, Operator'S Manual, Page: 26 / 39

23
Operation
Restrictions on Oper a tion
There is a case where the control unit switch is inoperative in order to prevent damage to the
table top.
Note 1: The maximum angle of Trendelenburg Head Up is 20 degrees at the highest position
although it may vary with the height of elevation.
Note 2: State where Head Section is removed
Note 3: Pressing the switch of the opposite side of the inclination direction with Left or Right
inclination of 5 degrees or more causes Lateral Tilt to return to level position. This is
not available with the switch of the same direction.
S tate of the s pecified po s ition Relea s ing method
1. Trendelen bu rg angle maxim u m
(Head down 20°)
Re s triction s on operation
1. De s cent inhi b it: Note 1 1. Trendelen bu rg head down
or ret u rn to level
(ret u rn to level po s ition)
1. Trendelen bu rg inclination
(Head down 30° or more)
: Note 2
2. Lateral tilt-Level s tate
1. De s cent inhi b it
(Halt at a height of 620 mm)
1. Trendelen bu rg head u p
or ret u rn to level
(ret u rn to level po s ition)
1. Trendelen bu rg inclination
(Head down 10° or more)
2. Lateral tilt-Level s tate
3. Elevation height
(620 mm or le
ss )
1. Lateral tilt inhi b it 1. Ret u rn to level
(ret u rn to level po s ition)
1. Trendelen bu rg inclination
(Head down 10° or more)
2. Lateral tilt inclination
(Left or right down 5° or more)
3. Elevation height
(620 mm or le
ss )
1. Trendelen bu rg inhi b it
2. Lateral tilt inhi b it: Note 3
3. De s cent inhi b it
1. Ret u rn to level
(ret u rn to level po s ition)
1. Elevation height minim u m po s ition 1. Trendelen bu rg inhi b it
(Halt at head down 5°)
1. Elevation
(Elevate
u p a height
a b ove 620 mm)