Miyachi Amada ISQ20 Series, Operating Instructions Manual

Page: 37 / 63

ISQ20
Commissioning
76609605EN-ISQ20-V1.2.docx 37/63
5.2.1 Mains Supply
Note mains voltage!
Warning
First compare the existing
connection voltage
to the voltage stated on the type label of
the equipment.
An intermediate power circuit of approx. 560V is created from the 3 phase 230/400 VAC
/ 50/60 Hz mains power supply in the inverter.
Due to the varying requirements in different countries the unit is delivered
without a
mains plug
. A suitable plug should be fitted or the unit should be connected to a
terminal box.
If the unit is part of a system, the mains connection must be made via the main switch of
the system.
In this case the red/yellow main switch on the unit has to be replaced by a black switch.
Please contact our service department for further information.
Warning