EN-
8
Function
Operation
Power on
Press and hold the power button 3 seconds. And
the LED flashes blue and sounds “Power on”.
Then flashes blue every second.
Power off
Press and hold the power button 5 seconds. And
the LED flashes red and sounds “Power off”.
Increase volume
Press the Volume Up V+ button
Decrease volume
Press the Volume Down V- button
Play media
Press the power button
Pause/restart media
playback
Press the power button
Skip to next track
Press and hold the V+ button for 1-2s
Skip to previous track
Press and hold the V- button for 1-2s
10. Control Instructions
Note:
-
ShareMe 5 will pair with the last paired device
automatically when turned on. But for some computers
or laptops you will need to manually pair every time.
-
There will be a alert tone when the volume reaches the
minimum or maximum level.
-
The microphone can't work when using a wired
headphone.
The “*” is available to the primary headphone with enabled ShareMe
function.
Answer a call*
The LED flashes red twice every second and
press the power button to answer the call. Then
the LED flashes blue twice every second.
Reject a call*
Press and hold the power button for 2 seconds
End a call*
Press the power button
Redial the last number*
Press and hold the power button for 2 seconds
sounds pose a potential hearing risk. It is highly
recommended that setting low volume level before
putting on the headphone and avoiding exposing
yourself continuously to high volumes. If you need to use
the headphone for a long period, rest ten minutes for a
half hour using.
