Mitutoyo 542-071, User'S Manual / Instructions For Use

Page: 31 / 76

3 Setting Parameters
17
No. 99MBC109B
3.4
Details of Display Mode (2-axis Models
Only)
3.4.1 Internal Structure of the Counter
2-axis models have 4 internal counters referred to as CEL (CEL1 to 4).
The counter values of CEL1 and CEL2 will be displayed as BANK1, and the
counter values of CEL3 and CEL4 will be displayed as BANK2.
There are 6 types of counting methods (UNIT A to F). You can select which
UNIT will be displayed in each CEL according to the Display mode setting.
Tips
• For details about BANK, see "4.2 Switching the Displayed BANK (2-Axis Models
Only)" (page 25).
• For details about Display mode selection, see "3.4.2 Details of Display Mode
Selection (Parameter Number 06)" (page 18).
The relationships between BANK, CEL, and UNIT in the Counter are shown in
the following figure.
The following figure shows an example of the Display mode set to Sum/
Difference calculation measurement (A - B).
UNIT A
UNIT B
UNIT C
UNIT D
UNIT E
UNIT F
BANK2
CEL3
CEL4
BANK1
BANK1
CEL1
CEL2
Count A
UNIT
Display mode
switchover Internal counters
Counter Display
(when BANK1 is selected)
Count B
A ± B
Speed A
Display A: CEL1
Display B: CEL2
Speed B
Memory