Page 7 of 7
DWM-W052_User_Manual
July. 9. 2012
COMMERCIAL IN CONFIDENCE
This material may not in whole or part be copied, stored electronically or communicated to third parties
without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing.
5.
Europe-EU Declaration of Conformity and Restrictions
Hereby, MITSUMI declares that this WiFi Module DWM-W052 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
This equipment is marked with the
symbol and can be used throughout the European community.
This indicates compliance with the R&TTE Directive 1999/5/EC and meets the relevant parts of
following technical specifications:
EN 301 893,
Broadband Radio Access Networks (BRAN) — 5 GHz high performance RLAN — Harmonized EN
covering essential requirements of Article 3(2) of the R&TTE Directive
EN 301 489-17
, Electromagnetic Compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility
(EMC) standard for radio equipment and services; Part 17: Specific Conditions for Wideband Data and HYPERLAN
Equipment.
EN 60950-1
, Safety of Information Technology Equipment.
EN 62311
, Assessment of electronic and electrical equipment related to human exposure restrictions for
electromagnetic fields (0 Hz-300 GHz).
Marking by the symbol
indicates that usage restrictions apply.
802.11a Restrictions:
- This product is for indoor use only when using channels 36, 40, 44, or 48 (5150–5250MHz).
- To ensure compliance with local regulations, be sure to select the country in which the access point in installed.
Caution: Exposure to Radio Frequency Radiation.
This device must not be co-located or operating in conjunction with any other antenna or transmitter, without further RF
Exposure evaluation.
Remark:
This module is fore a fixed application only. The OEM integrator will need to conduct full EMC testing in
accordance with EN301 489-17 in the final use configuration.
