KNOWING YOUR HEATER
Operation Instruction
1. Remove heater from its carton and unwind the cord to its full length. Set the
appliance on a dry, level and sturdy surface.
2. Plug the appliance into a 220-240VAC 50 Hz electric outlet. Press “Power
switch” behind the heater and turn the “Mode Setting” from
、I
to II,
also turn the power from “Min” to “Max”, then fan heater start to work. You
can setting the mode and power as you like.
3.
is fan mode, I and II is the heat mode setting.
4. Press “Qscillating Swicth” on the top panel control when the product start
work . The heater will oscillate. Press it again, the unit will stop to oscillation.
Tip over switch
The heater is fitted with a safety switch cuts the heater off if falls over.
Overheat safety device
Your heater is fitted with a safety device the switched off the heater in the
event of overheating. Should the heater stop working, turn the heater off,
remove it from the mains and inspection for blockage of air inlet or outlet.
Wait at least 30 minutes for the protection system to reset before
attempting to restart the heater. If the heater fails to operate or the safety
device switches the heater off again, return heater to your nearest service
centre for examination or repair.
CARE AND MAINTENANCE
The heater requires regular cleaning to ensure trouble free operation:
Always turn off unplug the heater from the mains supply before
cleaning.
Use a damp cloth to wipe the exterior of the heater to remove dust
and dirt.
Use a vacuum cleaner to remove dust and fluff from the inlet and
outlet grilles.
Ensure the heater is dry before plugging back into the mains supply.
If the heater has collected dust or dirt inside the unit or around the
element, have the unit cleaned by a qualified service agent. Do not
operate the heater in this condition.
Storage: If the heater is not in use for a long period, pack the heater and
user manual into the original box, and stored in dry and ventilating places.
WASTE ELECTRICAL PRODUCTS SHOULD NOT BE
DISPOSED OF WITH HOUSEHOLD WASTE. PLEASE
RECYCLE WHERE FACILITIES EXIST. CHECK WITH YOUR
LOCAL AUTHORITY FOR RECYCLING ADVICE.
CONNECTION TO POWER
Before Switching on make sure that the voltage of your electricity
supply is the same as that indicated on the rating plate.
Oscillating switch
Power from Min to
Max
Power switch
