Return the pager to the standby screen.
DOEN BUTTON
DOEN BUTTON
DOEN BUTTON
DOEN BUTTON
*
Read Message.
(SELECT)
(SELECT)
(SELECT)
(SELECT)
Select Function.
Control Alarm.
Delay to return the Standby Screen.
2.
2.
2.
2.
OPERATING INTRODUCTIONS.
OPERATING INTRODUCTIONS.
OPERATING INTRODUCTIONS.
OPERATING INTRODUCTIONS.
2-1.POWER ON.
2-1.POWER ON.
2-1.POWER ON.
2-1.POWER ON.
Press Up or Down button for two seconds in power Off or replace a new battery to
Turn your pager on.Your pager gives an alert sound and vibration.
After displayong the power up screen, the time of day, day of week, and an alert indicator
are shown on the standby screen.
2-2.RECEIVING AND READING MESSAGE.
2-2.RECEIVING AND READING MESSAGE.
2-2.RECEIVING AND READING MESSAGE.
2-2.RECEIVING AND READING MESSAGE.
Your FLEX pager can receive up to sixteen 20 character messages. When a message is
received the pager alerts for eight seconds.
Press the doen button to display the message and the time the message was recevied.
Press the down button to display the second screen.
The first screen of your message displays the message slot number and time recevied.
If a message is not read, the screen displays the number of unread message
(1 memos/2 memos) until all message are read.
1 Unread Message 2 Unread Message
3.
3.
3.
3.
SELECTING FUNCTIONS.
SELECTING FUNCTIONS.
SELECTING FUNCTIONS.
SELECTING FUNCTIONS.
3-1.SETTING THE MODE.
3-1.SETTING THE MODE.
3-1.SETTING THE MODE.
3-1.SETTING THE MODE.
Press the up button for two seconds to enter the mode function on the standby screen.
Either “DELETE ALL?’ or ‘MELODY SET?’ is displayed, depending on the message.
