EN-34
FEATURE menu
FEATURE
ADVANCED MENU
SETUP
SCART INPUT
AUTO
AUTO
OFF
STANDARD
OFF
VIDEO SIGNAL
LAMP WARNING
HIDE OSD
opt.
LANGUAGE
ADVANCED MENU
FEATURE
ASPECT
PROJECTOR ID
NORMAL (FULL)
AUTO
English
ALL
DISPLAY INPUT
ENTER
CINEMA MODE
PASSWORD FUNCTION
MENU POSITION
opt.
A
Ë
RESET ALL
OK
1.
FILTER MENU
ENTER
STANDARD
HIGH ALTITUDE MODE
ITEM
SETTING
FUNCTION
ASPECT
NORMAL (FULL)
Input video signal is displayed at the max height (800 pixels) or max
width (1280 pixels) of the panel while its aspect ratio is maintained.
NORMAL (16:9)
Select this setting when using a 16:9 screen.
NORMAL (4:3)
Select this setting when using a 4:3 screen.
16:9
Regardless of the type of input signal, image is displayed at 16:9
aspect ratio (1280 x 720 pixels). Select to expand squeezed (or
horizontally compressed) images such as DVD images to 16:9.
Press the ENTER button to select whether or not to display signals
at 16:9 depending on their type. (See page 24.)
REAL
Input video signal is displayed at its original pixel size.
FULL
Select to project images in full size (1280 x 800 pixels) irrespective
of type of input signal.
PROJECTOR ID
ALL
Select this option to control the projector regardless of the ID
number. (See page 10.)
01 to 63
Use to set the ID number (two-digit number). (See page 10.)
PASSWORD FUNCTION
DISPLAY INPUT /
MENU ACCESS /
SPLASH ID SCREEN
Use to enable or cancel the password lock. See page 49 for details.
MENU POSITION
1 (upper left) / 2 (lower right)
Use to change the position of the menu.
CINEMA MODE
AUTO
The film mode will be automatically activated when a film source
signal is input.
Select AUTO for normal use.
When flicker occurs on the screen, frame dropping or other incorrect
display occurs, or jaggies on slanting lines are remarkable, select
either FILM or VIDEO, which improves the symptom better.
FILM
Fixed to the film mode.
VIDEO
The film mode will not be activated.
FILTER MENU
ENTER
The filter menu for the following settings is displayed.
AUTO ROLL UP
PERIOD
OFF / EVERY 500H /
EVERY 750H / EVERY 1000H
You can set the roll interval of the filter. (See page 56.)
MANUAL ROLL UP
OK
Select this option to roll the filter immediately. (See page 56.)
REMAINING FILTERS **
The remaining amount of the filter sheet is displayed.
FILTER USAGE TIME
****H
The usage time of the current filter sheet is displayed.
FILTER
RESET
OK
Use to reset the roll counter of the filter.
LANGUAGE
/ English / Español /
Deutsch / Français / Italiano /
/
/
/
PORTUGUÊS / SVENSKA /
POLSKI / Nederlands/
Norsk(Bokmål) /
/
Türkçe /
ѓѥќѥѳъѕ
/ Bahasa
Indonesia /
Bahasa Melayu /
Use to select the language used in the menus.
HIGH ALTITUDE MODE
STANDARD
Select this option for normal use.
HIGH ALTITUDE
Select this option for use at an altitude of 1500 to 2700 meters
above the sea level.
Menu operation (continued)
