15
No images appears on the screen
•Check the power cord is connected firmly.
•Check the correct input signals are selected for the terminals of the
external devices.
•Check the external devices are connected to the terminals firmly.
•Check the external devices are turned on.
Remedies
Problems
The power switch turns on or off
with a snap.
•It sounds because of static electricity, not by a failure in the projector.
H u e o f t h e i m a g e i s n o t
appropriate.
•Check the signal connection between the external device and the projector.
The 7-segment protect display
lights.
•When a failure occurs in the projector, the 7-
segment protect display on the terminal
panel shows any figure of 0 to 7 in red and
the projector turns off automatically. Please
contact your Mitsubishi dealer immediately
in such a case.
Please check the following before contacting your dealer for service. Errors in signals are
apt to be taken for problems in the projector.
Troubleshooting
The cabinet makes a creak
•It sounds when the cabinet expands or shrinks because of change in the
ambient temperature, which doesn't affect projector's performance.
STANDBY
STATUS
Summary of Contents for VS-50FD10U
Page 1: ...DLPTM PROJECTOR MODEL VS 50FD10U User s Manual...
Page 2: ...2...
