Mitsubishi SR-HD5, Owner'S Manual

Page: 71 / 96

HD Receiver’s Menu System
Page 7-11
Video
Highlighting the Video button on the screen and pressing the key on the remote control
will return you to the last program you were viewing.
AutoSet
AutoSet is designed to help in the initial programming of your channel lists. When you select the
AutoSet button, a pop-up menu appears showing each of the channel lists. Highlight and select a
channel list to be programmed. Once selected, the AutoSet Progress pop-up status panel appears.
It will take several minutes for the HD receiver to scan through all channels and determine which
ones you are authorized to receive. The results of this scan will be stored in the designated
channel list.
Note: The AutoSet Channel Scanning Process can inadvertently exclude some
channels (such as the MUSIC CHOICE channels) or include some Pay Per
View channels. You can manually edit your channel lists after AutoSet is done
(see “Tag Boxes” below).
Rename
When you highlight the Rename button and press the key, a Rename List pop-up menu
appears. You can choose any of the first three lists to be renamed. The All and Family lists cannot
be renamed. Once you have selected a list, a Rename List entry keyboard pop-up panel appears.
You can highlight the desired letter using the , , , and keys. Press
to enter the letter.
When you have finished, choose OK .
Clear
You may decide to remove all channels from a particular list later on. Selecting Clear will allow
you to clear all channels from a chosen list. You may then add channels back in.
Set
If you decide to include all channels in a particular list, selecting Set will allow you to specify the
list. You may then remove channels from this list, if you so choose (see “Tag Boxes” below).
Tag Boxes
The four columns of small boxes on the right hand side of the CHANNEL LISTS screen are the
Tag Boxes. The first three columns are the lists traditionally known as Fav. A, Fav. B, and Fav. C .
The fourth column is the Family list.
In the CHANNEL LISTS screen, use the , , , and keys to highlight the button that
corresponds to the channel number and list that you wish to change. Press the key to add
or remove the check mark, which indicates that the channel in that row is included in the list
shown at the top of the column.
To help you decide whether to include or exclude a certain channel, the title of the currently
airing program for that channel will appear at the top of the screen.
Locking and unlocking the HD receiver is described later in this chapter. When the system is
locked, the passcode will be needed to modify the settings of the FAMILY channel list to use the
other channel lists.
SELECT
SELECT
▲
▲
▲
▲
SELECT
▲
▲
▲
▲
SELECT