5
For the safety, please make sure to carry the sewing machine head by more than two people.
Caution
3-8 Installation of the oil pan
(1) Assemble the oil pan (NO.1) and
oil bottle (NO.2), which are
enclosed in the accessory box.
(2) Insert the oil bottle (NO.2) into the
tabletop cut-out hole (NO.3), which
has much shorter distance from
the bottle center to the front.
(3) Install the oil pan (NO.1) parallel
with the table front edge.
(4) Fix the oil pan (NO.1) at its four
corners on the table top with four
staples (NO.4) en-closed in the
accessory box.
3-9 Installation of the sewing machine head
(1) Make sure to hold the machine table with the caster stopper.
(2) Fit the rubber cushion pads (NO.6) into the each hole (NO.7) on the tabletop. The rubber
cushion pads (NO.6) are enclosed in the accessory box.
(3) Put the sewing machine head on the table top and set the each leg (NO.8) to the each
rubber cushion pad (NO.6)
(4) Attach two hinges (NO.9) temporarily, make the setting screw (NO.11) fastening with the
thread holes (NO.10) light, on the left side surface of the machine bed with the hexagonal
socket head set screws (NO.11).
(5) At this time, take notice that the E-shaped snap ring on the front side hinge must be come
to the backside, and E-shaped snap ring on the backside hinge must be come to the front.
(6) These parts are all enclosed in the accessory box.
(7) Fit the screw holes (NO.13) of the hinges (NO.9) to the bolt setting holes (NO.12) on the
table top then, pass the bolt (NO.14) through these holes and fasten the bolt (NO.14) to fix
the hinges (NO.9) with the flat washers (NO.15), the spring washers (NO.16) and the nuts
(NO.17).
(8) Fasten firmly hexagonal socket head set screws (NO.11), which set the hinges (NO.9)
temporarily at above procedure (4) then, fix the hinges (NO.9) perfectly.
(9) Insert the headrest (NO.18) into the hole (NO.19) on the tabletop.
2
1
4
7
6
10
16
17
18
19
13
11
9
14
12
3
15
8
From the library of Superior Sewing Machine & Supply LLC • www.supsew.com
