41
10. REMOVING THE LINE FLOW FAN
(1) Remove the terminal block cover.
(2) Remove the front panel.(see the photo 1)
(3) Remove the electrical parts box.(see the photo 8)
(4) Remove the nozzle assembly.(see the photo 7)
(5) Remove the fan motor.(see the photo 9)
(6) Remove the pipe fixture with 2screws.(see the photo12)
(7) Remove the left / right screws of the heat exchanger and
pull the left-hand side up.
(8) Remove the 2screws by sliding it toward you remove the
fixture(fixing bearing).
w
The fan motor is removable first , when the fan removing
is hard.
w
When resetting the fan to the fan motor.
Locate and fix the shaft after installing the fan.
(Photo11)
Heat exchanger
Set screws
Fixture
(fixing bearing)
11. REMOVING THE HEAT EXCHANGER
(1) Remove the terminal block cover.
(2) Remove the front panel.(see the photo 1)
(3) Remove the electrical parts box.(see the photo 8)
(4) Remove the corner box.
(5) Remove the nozzle assemble.(see the photo 7)
(6) Remove the 2screws and the pipe fixture.
(7) Remove the 2screws and heat exchanger.
Heat
exchanger
Set screw
Pipe fixture
Set screws
(Photo 9)
9. REMOVING THE FAN MOTOR.
(1) Remove the terminal block cover.
(2) Remove the front panel.(see the photo 1)
(3) Remove the electrical parts box.(see the photo 8)
(4) Remove the nozzle assemble.(see the photo 7)
(5) Remove the fan motor leg fixing 3screws.
(6) Unscrew the set screws using by alankey and remove it by
sliding the fan motor to right.
(7) Remove the 4screws and remove the motor cover from the
fan motor leg.
(Photo 10)
screws
Set
screw
Fan motor
Motor cover
motor leg
Fan motor
Motor cover
OPERATION PROCEDURE
PHOTOS & ILLUSTRATION
12. REMOVING the SIGNAL RECEIVING P.C. BOARD
(1) Remove the terminal block cover.
(2) Disconnect the connector <yellow> for the wireless remote
controller.
(3) Remove the front panel.(see the photo 1)
(4) Remove the 2screws and signal receiving p.c. board cover.
(5) Remove the signal receiving p.c. board.
Set screws
Front
panel
Signal receiving p.c. board cover
Signal receiving p.c. board
(Photo 14)
(Photo 15)
(Photo 12)
Front
panel
OC305--2.qxp 04.4.28 11:25 AM Page 41
