22
Folding down the rear seat creates more
luggage space.
Folding down the rear seat
1. Lower the headrests completely.
2. Stow away the seat belt for the centre seating
position, if applicable.
- Please refer to “Rear-centre 3-point type seat
belt” and “Rear seat belt storage” under the
“Seat belts” section of the safety equipment
chapter of the owner’s manual.
3. Lift the front side of the seat cushion.
Then, flip the seat cushion forward.
4. Tilt down the seat buckles. Then, pull up
the lever on the seat backrest and fold the
backrest forward.
5. To use the rear seat again, raise the seatback
and then the buckles. Align the hook and the
groove of the seat cushion and push down
the front side of the cushion.
6. Check that the seat belt buckles are above
the seat cushion.
Seat belt buckle
Hook
Brake Warning Lamp
This lamp illuminates when:
— the parking brake is applied
— the brake fluid level is too low
— there is a braking system fault
SRS Air Bag/Pretensioner Warning Lamp
This lamp illuminates when there is a fault with the SRS
air bag or the pretensioner system.
Active Stability Control (ASC) Indicator
Lamp
This lamp blinks when ASC is activated, and illuminates
when there is an ASC failure.
Active Stability Control (ASC) OFF
Indicator Lamp
This lamp illuminates when ASC is deactivated with the ASC
OFF switch or when there is an ASC failure.
Seat Belt Reminder Warning Lamp
This lamp illuminates or blinks when the driver’s seat
belt is not fastened.
Check Engine Warning Lamp
This lamp illuminates or blinks when there is an engine
control system fault.
ABS Warning Lamp
This lamp illuminates when there is an ABS system
fault.
Luggage area arrangement
