Mitsubishi NZ2GFCF-D62PD2, User Manual

Page: 275 / 304

273
APPENDICES
A
Appendix 3 Details of R
emote Buffer
Memory Addresses
(10)Module-based parameter data (address: 0129
H
, 0149
H
)
Address
Name Description Default
CH1 CH2
0129
H
0149
H
External control
input response time
setting
• Set the input response time of CH  Phase Z input terminal (Z1, Z2), CH 
Function input terminal (FUNC1, FUNC2), and CH  Latch counter input
terminal (LATCH1, LATCH2).
• The following shows the setting range.
002A
H
1) Z phase input response time setting
Setting
OFF
→
ON
Response time
ON
→
OFF
Response time
00 0.25µs 2.5µs
01 0.1ms 0.1ms
10 1.0ms 1.0ms
2) Function input response time setting
Setting
OFF → ON
Response time
ON → OFF
Response time
00 0.02ms 0.1ms
01 0.1ms 0.1ms
10 1.0ms 1.0ms
3) Latch counter input response time setting
Setting
OFF
→
ON
Response time
ON
→
OFF
Response time
00 0.02ms 0.1ms
01 0.1ms 0.1ms
10 1.0ms 1.0ms
• When CH  Function input logic setting (address: 0127
H
, 0147
H
) and CH 
Latch counter input logic setting (address: 0128
H
, 0148
H
) are set to
Negative Logic (1), the OFF
→
ON response time and the ON
→
OFF
response time invert. For example, when CH  Latch counter input logic
setting (address: 0128
H
, 0148
H
) is set to Negative Logic (1) and
corresponding bits for this area are set to 00, the OFF → ON response time
is 0.1ms.
• The reflection timing of the setting value
When Initial data setting request flag (RY9) is turned off then on
b15 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 b10 b11 b12 b13 b14
0 0 0 0 0 0 0 0 2) 3) 1) 0 0
0 (fixed)