Mitsubishi NZ2GF2B-60DA4, User Manual

Page: 31 / 174

29
CHAPTER 3 SPECIFICATIONS
3
3.5 List of Remote
I/O Signals
3.5
List of Remote I/O Signals
This section lists I/O signals for a master/local module.
The device numbers shown are the example with the remote I/O signals of the main module assigned to the I/O
numbers of RX0 to RX1F and RY0 to RY1F.
Remote input (RX) indicates the input signal from the D/A converter module to the master/local module.
Remote output (RY) indicates the output signal from the master/local module to the D/A converter module.
The remote I/O signals of the main module and extension module are assigned as shown below.
For details on the remote I/O signal, refer to the following.
• Page 131, Appendix 1
Module Remote input (RX) Remote output (RY)
Main module RX0 to RX1F RY0 to RY1F
Extension module 1 RX20 to RX2F RY20 to RY2F
Module
type
Remote input
signal direction: D/A converter module
→
Master/local module
Remote output
signal direction: Master/local module
→
D/A converter module
Device
number
Description
Device
number
Description
Main
module
RX0 Use prohibited RY0 Use prohibited
RX1 Use prohibited RY1 Use prohibited
RX2 Use prohibited RY2 Use prohibited
RX3 Use prohibited RY3 Use prohibited
RX4 Use prohibited RY4 Use prohibited
RX5 Use prohibited RY5 Use prohibited
RX6 Use prohibited RY6 Use prohibited
RX7 Warning flag RY7 Use prohibited
RX8 Use prohibited RY8 Use prohibited
RX9 Initial data setting completed flag RY9 Initial data setting request flag
RXA Error flag RYA Error clear request flag
RXB Remote READY RYB Use prohibited
RXC Use prohibited RYC Use prohibited
RXD Use prohibited RYD Use prohibited
RXE Use prohibited RYE Use prohibited
RXF Use prohibited RYF Use prohibited
Main module Extension module 1