Mitsubishi NM-IP4500, Installation Manual, Page: 8 / 29

NM ‐ IP4500
10
LAN Connector (Ethernet)
This is a RJ45 LAN connector for 10/100 Base ‐ T Ethernet.
RS ‐ 485
The camera supports RS ‐ 485 Serial Communication Port.
3 pin connector for power
The camera needs an AC24V for power supply. Refer to the section “ 5.1.Connectors” for more specific
information.
External video
It is an analog video output port.
5 pin connector for D/I
The camera provides 2 channel D/I. Refer to the section “ 5.1.Connectors” for more specific information.
6 pin connector for D/O
The camera provides 4 channel D/O. Refer to the section “ 5.1.Connectors” for more specific
information.
Audio Output
The camera has a mono audio output.
Audio Input
The camera has a mono audio input.
Reset
Reset switch is used for restarting or resetting the camera as Factory Default (FD). Refer to the section
“ 6.3. Reset” for more specific information.