Cable Tie
Cable Tie
Cable Tie
Urethane Tape
Wrap with half-cut urethane tape.
Roof Lining
Cable Tie
Urethane Tape
Camera Cable
Camera
Cable
Camera Cable
Half-cut Urethane Tape
Half-cut Urethane Tape
Wrap with
tape.
Wire
Grommet
Wire
Grommet
Apply urethane
tape at the edge.
Insert terminals into 6P coupler.
Protect the washer hose from damage by bending
the edge of wire into horseshoe shape.
(4) Wrap the camera cable with half-cut urethane
tape.
(3) Wire the camera cable on the left side of
vehicle along vehicle harnesses toward
the rear.
Fix the camera cable to vehicle harnesses
with cable ties.
(5) Flip the edge of the roof lining slightly and
wire the camera cable inside the roof lining.
(6) Remove a grommet from the vehicle.
(7) Use wire to pass the camera cable through
the grommet and wire the cable to the
tailgate.
(8) Wire the camera cable along
vehicle harnesses on the
tailgate.
Fix the camera cable to
vehicle harnesses with cable
ties.
(9) Remove the vinyl tape
protecting the pin terminals
of the camera cable.
(10) Insert the pin terminals of
the camera cable into the
6P coupler.
(Refer to Connection of
Camera Cord Terminals on
page 9.)
