40
12-1. MUZ-HC25VA MUZ-HC35VA MUZ-HC35VAB
NOTE
: Turn OFF power supply before disassembling.
OPERATING PROCEDURE
PHOTOS
1. Removing cabinet and panels
(1) Remove the screw fixing the service panel. (Photo 2)
(2) Pull down the service panel and remove it. (Photo 2)
(3) Disconnect the power supply and indoor/outdoor con-
necting wire.
(4) Remove the screws fixing the top panel. (Photo 1)
(5) Remove the top panel. (Photo 1)
(6) Remove the screws fixing the cabinet. (Photo 1)
(7) Remove the cabinet.
(8) Remove the screws fixing the back panel.
(9) Remove the back panel.
Photo 1
Screws of
the cabinet
Photo 2
Screw of the
service panel
Direction to
remove
Hooks
Service
panel
Screws of
the top panel
Screws
of the
top panel
(1) Slide the sleeve and check if there is a locking lever or not.
(2) The terminal with this connector has the
locking mechanism.
Slide the sleeve.
Pull the terminal while
pushing the locking
lever.
Hold the sleeve, and
pull out the terminal
slowly.
Connector
Sleeve
Locking lever
<"Terminal with locking mechanism" Detaching points>
The terminal which has the locking mechanism can be detached as shown below.
There are two types (refer to (1) and (2)) of the terminal with locking mechanism.
The terminal without locking mechanism can be detached by pulling it out.
Check the shape of the terminal before detaching.
12
DISASSEMBLY INSTRUCTIONS
Summary of Contents for MUZ-HC25VA
Page 9: ...9 MUZ HC25VA MUZ HC35VA E1 MUZ HC35VAB E1 6 WIRING DIAGRAM...
Page 10: ...10 MUZ HC35VA E2 MUZ HC35VAB E2...
Page 43: ...43...
