Mitsubishi MELSEC iQ-F FX5 series Programming Manual Download Page 776

Page: 776 / 888

774

16 SINGLE NUMBER VARIABLE FUNCTIONS
16.9 Arc Sine Operation

16.9

Arc Sine Operation

ASIN(_E)

These functions output the arc sine value of an input value.

Setting data

■

Descriptions, types, and data types

Processing details

■

Operation processing

• These functions calculate the arc sine of the REAL type data input to (s), and output from (d).

• These functions are expressed as follows when the input value is "A" and the output operation result is "B".

• A value input to (s) is the REAL type data value and within the following range.

• A value (angle) in radians (angle



/180) is output from (d).

■

Operation result

Function without EN/ENO

The following table lists the operation results.

Function with EN/ENO

The following table lists the execution conditions and operation results.

When FALSE is output from ENO, data output from (d) is undefined. In that case, modify a program so that the data output from (d) is
not used.

Operation error

Ladder diagram

Structured text

[Without EN/ENO]

[With EN/ENO]

[Without EN/ENO]
d:=ASIN(s);
[With EN/ENO]
d:=ASIN_E(EN,ENO,s);

Argument

Description

Type

Data type

Execution condition (TRUE: Execution, FALSE: Stop)

Input variable

BOOL

Input

Input variable

REAL

ENO

Output status (TRUE: Normal, FALSE: Abnormal)

Output variable

BOOL

Output

Output variable

REAL

B=SIN

-1

ASIN(_E): -1.0 to 1.0

Operation result

(d)

No operation error occurred

Operation output value

An operation error occurred

Indefinite value

Execution condition

Operation result

ENO

(d)

TRUE (Executes operation)

TRUE (Operation error did not occur)

Operation output value

FALSE (Stops operation)

FALSE

Indefinite value

Error code
(SD0/SD8067)

Description

3402

A negative value is input.

3405

A value input by these functions is other than -1.0 to 1.0.

ENO

Summary of Contents for MELSEC iQ-F FX5 series

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MELSEC iQ-F FX5 series

Reviews:

Mitsubishi MELSEC iQ-F FX5 series, Programming Manual, Page: 776 / 888

Search results

Summary of Contents for MELSEC iQ-F FX5 series

Reviews: