36
SPECIFICATIONS
4. Replacement of Engine Oil Filter
Please provide a cartridge type engine oil filter.
[First time]
Replace after operation for 50 hours.
[Second time and on]
Replace at every operation for 100 hours.
Remove the engine oil filter (cartridge type)
using a special tool (commercial item) if not
loosened manually.
After replacing the engine oil filter, oil is
supplied more for the volume of the oil filter;
therefore, check the oil level at the oil level
gauge and supply oil to the upper limit of the
oil level gauge if insufficient.
NOTE
- When attaching the engine oil filter, apply
oil to the packing side, tighten the engine
oil filter manually, and tighten 2/3 rotation
approximately after the packing makes
contact with the sealing face.
1944 0058
Oil Level Gauge
Oil Level Gauge
Oil Filter
Oil Filter
[Tractor Right Side]
[Tractor Right Side]
5. Refueling
Check the remaining amount in the fuel tank
and refuel passing the screen.
1944_0059
Screen
Screen
Fuel Cap
Fuel Cap
For fire prevention
- Keep clear of fire when refueling.
The fuel may catch fire, causing a fire.
- Wipe off split fuel completely.
- Check if there is any fuel leakage from
the fuel hose or joint and if any, replace
it.
W
ARNING
Summary of Contents for Mahindra GX3600
