18
1
PICTURE
CONTRAST ........ Adjusts the picture contrast. The contrast becomes higher
as the number increases.
BRIGHTNESS .... Adjusts image brightness. The image becomes brighter as
the number increases.
COLOR TEMP .... Adjusts color temperature.
TINT .................... Adjusts the color balance in the image. The color balance
of the image shifts green as the number increases and
shifts to purple as the number decreases (only when
NTSC or 4.43 NTSC is selected).
COLOR ................ Adjusts the color intensity of the image (only when NTSC, PAL, SECAM or 4.43 NTSC is
selected).
SHARPNESS ...... Adjusts the picture sharpness. The sharpness becomes sharper as the number increases
(only when the source is selected to VIDEO).
2
PRESENTATION
This menu appears when either the display enlargement and PC card play
functions are used.
ZOOM MODE ..... Selects the desired type of expand mode, type1, 2, 3 or 4
(Actual size display).
POSITION .......... Selects the desired position of the sub image in expand
mode.
AUTO SLIDE
TIME ................... Sets the length of time before the image switches to the next image in PC CARD automatic
playback mode.
REPEAT .............. Sets to repeatedly playback the PC CARD presentation.
3
INSTALLATION
IMAGE REVERSE Use to reverse or invert the projected image. MIRROR is
used for rear projection. MIRROR INVERT is effective
when the projector is ceiling-mounted.
KEYSTONE ........ Adjusts keystone correction of the image. If the image is
keystoned, select the approximate setting. For normal
use, select 0˚. You can use it only when IMAGE REVERSE
is OFF.
AUTO POWER ON .... To select whether to boot up automatically when the power
is turned on by a breaker. In this case, the main power of the projector has to be ON. Set this
when the projector is hanging on the ceiling.
• The projector is in stand-by mode when the lamp does not come on. In this case, use the
remote control to turn on the lamp.
TEST SIGNAL .... Use to display the built-in test patterns on the screen.
• The display will disappear when the setting is OFF or press the button except MENU,
{
,
}
, STILL, LASER, mouse pointer and R/L-click.
4
OPTION
SXGA PICTURE . Select MOTION when motion images are mainly
projected. Select STILL when still images such as PC-
CARD images are mainly projected. It works only when
inputting personal computers of SXGA signals.
MENU POSITION . Use to select the position where the menu is displayed
(upper left or lower right on the screen).
AUTO POWER OFF .. Use to select the length of time the projector switches to
standby when there is no input signal selected source.
Select OFF to cancel this function.
VIDEO SIGNAL . When AUTO is set, the appropriate video format is automatically selected according to the
input signal. If the image does not appear correctly, select the desired video format
manually. Adjust the unit to the appropriate format when the unit either is not projecting
normally in auto mode or is inputting PAL-M/PAL-N signals.
LANGUAGE ....... Use to select the language for the projector display such as menu. (
/ English / Español
/ Deutsch / Français / Italiano /
)
Menu setting (continue)
