Mitsubishi GOT1000 GT11, User Manual

Page: 50 / 256

5 - 4
5.2 System Configuration when EMC Directive is Applicable
5.2.1 About models applicable to the EMC Directive
5.2 System Configuration when EMC Directive is
Applicable
Connection conditions and models where the EMC Directive is applicable are shown below. (Available April,
2005)
5.2.1 About models applicable to the EMC Directive
The following table lists the modules compliant with the EMC Directive.
: Compliant with EMC Directive : Not compliant with EMC Directive
Please use the GOT whose hardware version is later than that described.
Confirm the hardware version with the products rating plate.
(Products that the EMC Directive applies to are marked with the CE mark logo.)
5.2.2 Connection format
Connection conditions where the GT11 is applicable to the EMC Directive are shown below.
Connection format: CPU direct connection (RS-422)
If connecting to a PLC not from this company (MELSEC-FX
2N
series), refer to the
manual of the connected device (PLC, microcomputer) for information about the
applicability of the EMC Directive.
Item EMC Directive Hardware version
GT1155-QSBD, GT1150-QLBD B
GT1155-QTBDQ, GT1155-QTBDA, GT1155-QSBDQ,
GT1155-QSBDA, GT1150-QLBDQ, GT1150-QLBDA
-
Hardware version
GRAPHIC OPERATION TERMINAL
MODEL
IN 20.4
SERIAL
MITSUBISHI ELECTRIC CORPORATION
MADE IN JAPAN
80M1 IND. CONT. EQ
US LISTED
JY550D26101A
540001 BC
BC
26.4VDC POWER 9.84W MAX
GT1155-QSBD