Mitsubishi FX3U-32DP, User Manual

Page: 22 / 74

16
FX
3U
-32DP PROFIBUS-DP Interface Block
User’s Manual
1 Introduction
1.2 External Dimensions
1.2 External Dimensions
1.2.1 External Dimensions and Part Names
[1] PROFIBUS-DP port (9-pin D-SUB Connector: #4-40unc inch screw thread)
[2] Extension cable
[3] Direct mounting hole: 2-
φ
4.5 (0.18"), mounting screw: M4 screw
[4] Status LEDs
→
For details on the status LEDs, refer to Section 9.1
[5] Extension port under the top cover
[6] Name plate
[7] DIN rail mounting groove (DIN rail: DIN46277)
[8] DIN rail mounting hook
LED Name Color Description
POWER Green
ON :
The connected PLC supplies power to the 32DP correctly
OFF :
Power is being supplied incorrectly from the PLC to the 32DP due to an unsecured
cable connection
FROM/TO Green
ON:
Constant FROM/TO access within 200ms intervals
OFF :
No FROM/TO access within 200ms
RUN Green
ON :
In cyclic data exchange mode
OFF :
Not in cyclic data exchange mode
Flashing :
The DP-Master is in clear mode or the 32DP is in fail-safe mode
DIA Red
ON :
Hardware error in the 32DP
OFF:
Normal Operation without errors
Flashing :
A user-diagnostic message or a DP-V1 Alarm/Status message is left unread
TOKEN Green
ON:
The 32DP has established a connection with the DP-Master at an appropriate baud
rate
A Class2 Master can access the 32DP now
OFF:
The 32DP has not established a connection at any baud rate
43 (1.7")
9 (0.36")
90 (3.55")
80 (3.15")
4 (0.16")
2-
φ
4.5
87 (3.43")
89 (3.51")
32
[7]
[8]
[5] [6] [3] [4]
[2]
[1]
Unit:
Mass (Weight):
Accessory:
mm (inches)
Approx. 0.2 kg (0.44 lbs)
GSD file (CD-ROM)
Dust Proof Sheet
Special Unit/Block No. Label