Mitsubishi FX2N-64CL-M, User Manual

Page: 32 / 94

FX2N-64CL-M CC-Link/LT Master Block System Configuration 4
4-6
4.4 Selection of connection cables, connectors and terminal resistors
For the latest information on the connection cables, connectors and terminal resistors, refer to
the homepage of the CC-Link Association (http://www.cc-link.org/) or catalogs (issued by the
CC-Link Association).
4.4.1 Selection of cables
For details on selection of connection cables, refer to the homepage of the CC-Link
Association or CC-Link/LT catalogs.
4.4.2 Selection of connectors
The table below shows the specifications of the VCTF cable connector and high flexible cable
connector.
For details on selection of connectors, refer to the homepage of the CC-Link Association or
CC-Link/LT catalogs.
*1 The body color is light blue.
4.4.3 Selection of terminal resistors
Use the CL9-TERM (gray). When only dedicated flat cables are used in the system, the CL9-
RYVK (black) is also available.
Make sure to use the terminal resistors having the same model name at the both ends of the
trunk line.
For details on terminal resistors, refer to the homepage of the CC-Link Association or CC-Link/
LT catalogs.
Connection cable Reference
Dedicated flat cable
For specifications, refer to Section 2.3. VCTF cable
High flexible cable
Connector Model name (manufacturer name)
Cover
color
*1
Cable insulator
outside diameter
Dedicated flat cable
connector CL-9-CNF-18
(Mitsubishi Electric System & Service Co.Ltd)
Light blue
−
VCTF Cable
Connector CL9-CNR-23
(Mitsubishi Electric System & Service Co.Ltd)
Green
φ
2.1 to 2.4
High Flexible Cable
Connector CL9-CNR-20
(Mitsubishi Electric System & Service Co.Ltd)
Yellowish
green
φ
1.8 to 2.1