Mitsubishi FREQROL-Z200-UL, Instruction Manual

Page: 27 / 120

SETTING TABLE
Acceleration/
deceleration
time
Description
Refer to
When the inverter is shipped, acceleration/ P. 83
deceleration time is set to 5 sec. for models P. 99
smaller than
and to 15 sec. for models
larger than
The time setting can be changed on the
parameter unit.
Acceleration/deceleration time is the time in
which the inverter output frequency becomes
equal to the frequency at
5 V of frequency
reference signal voltage.
frequency
For operation with external signals
P. 83
P. 97
When the inverter is shipped, the maximum
inverter output frequency is set as follows:
Voltage signal ---
at DC 5 V (or
Current signal a t
output frequency setting can be
changed by changing “frequency at 5 V
frequency reference input signal (or at 20mA
frequency reference signal)
For operation with parameter unit
The maximum output frequency can be
increased up to the maximum frequency
limit (set to
when the inverter is
shipped) .
Electronic Setting should be based on current ‘value (at P. 83
thermal relay indicated on the nameplate of the motor. P. 97
0
0
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com