9
Your company internal use only.
Copyright (C) Mitsubishi Electric Corporation.
DY-1MU3E21-T
DISASSEMBLING PROCEDURES
Ⓒ
x 4
●
Disassembling procedures
In reverse of assembling procedures.
●
Assembling procedures
1. Lock connector after inserting M001 to the connector of S2-DY as figure below.
Then insert reverse side to M001 and lock the connector.
2. Screw M014 and S2-DY with
Ⓒ
. (4 places)
3. Stick M009 on M014. (Follow lower right figure)
4. Insert 2 tabs of M005 to the rectangle hole of S2-DY,
and fit tabs on the 2 sides of M005, the screw M005 with
Ⓐ
.
Ⓐ
x 2
M009 : SHEET-HS
M009
M014
M009
M014
M014 : CD8-MECHA(955823)
M001 : FLAT-CABLE 18P
S2-DY
M005 : COVER-U
M014 : CD8-MECHA(955823)
M009 : SHEET-HS
M001 : FLAT-CABLE 18P
M014
M014
No.
Screw
Tighten torque(N
・
m)
Ⓐ
3X6
0.8 +0.2/-0.1
Ⓒ
2.6X6S
0.6 +0.2/-0.1